If the summer in your town has just started or is about to start, the last thing you will want is to flip your air conditioner on, only to find out that it isn’t working. Viola! There is nothing sadder than that. However, if you know five important secrets that can help keep your central air-conditioning to the very best, then you have nothing to worry about. Whenever your air conditioning system has been sitting idle for a few months, it collects leaves & debris, and other related elements that can affect its performance. Therefore, a bit of maintenance is always needed before the season and off-season to keep your appliances tiptop. Beware that if you are not maintaining your AC properly, you just may end up waiting through major of the summers to get it checked by a pro. On the other hand, if you follow these secrets that include how-to information on checking your coolant lines, cleaning the condenser coils, and testing the unit. So, now is the time to get your A/C system up and running, and keep it in a condition that doesn’t keep you sulking in a hot corner on a long summer day.
Safety comes first! Before you start working on a central air conditioner, always remember to turn off the condenser’s power. It typically has a 240-volt weatherproof disconnect box that contains fuses, lever, or a circuit breaker. You just have to turn this off, and start following the steps we are telling you right now. The most important and the easiest step of all is the first one that we are telling you. Replace, or clean your air-handler filters twice a year or whenever you think they have started to clog with dust. If the dust accumulates way too much, then cleaning isn’t the option, and you will have to replace the filters. If you neglect it and don’t look after the filters, the air flow will be restricted that will reduce the efficiency of your appliance.
Next up is the central AC’s condenser unit. We all know about it, albeit unaware of the technical term. It is typically located outdoors and is a large fan in a metal box. Now, you got it. Right? Protect it through months when you aren’t using the AC unit especially winters by covering it with a condenser cover or tarp. It will prevent the debris and dust from accumulating and destroying the insides. If too much dirt has gotten inside the unit, then you will probably have to look for effective air conditioning repairs Blackburn. Otherwise, just remove the side and top panels or protective grille from the condenser unit, to clean the insides without tugging on any wires or other equipment. Carefully scoop out the debris, leaves or any other filth from the base. If your appliance has a drain, make sure that everything is drained out completely. You can use a vacuum and a rag to clean the fan blades of the blower.
After you are done with the condenser, check the coolant lines. Coolant lines are refrigerant tubes or pipes that run from the evaporator on the air handler to the condenser. They are usually covered with the foam to prevent them from losing energy. Check if there are any areas that are frayed or need replacement. It’s not a rocket science, so don’t worry. You will have to install foam insulation sleeves or wrap the lines in a spiral fashion with foam insulation tape. Once you are done with the thorough checking and following the steps above, all your air conditioning Ringwood unit to dry completely. When done, turn the power to the condenser back on. If you don’t know how to do that, follow this. Turn off the thermostat in your home. After it, turn on the power at both the main panel and disconnect box. Finally, turn your thermostat to the COOL option.
That’s it! This was our holy grail to keeping your Air Conditioner fit and fat, no matter what time of the year. Just with a little effort and a bit of attention, you can save a lot of money that could have been spent on repairing the appliance, or buying a new one. Be clever with your AC, because it is what gives you a relief from the scorching summers.